How to make invisible man costume?

Materials Needed

• Disposable trench coat with two layers
• See-through fabric or a 2nd skin mask matching the trench coat lining
• Two pairs of pants (same color)
• Suspenders and a bow tie
• Plastic bags or paper for stuffing
• Metal coat hangers
• Long gloves
• Casting tape
• Sunglasses
• Hat
• Scissors
• Super glue or epoxy
• Mannequin head (plastic or foam)

Step-by-Step Instructions

Step 1: Creating the Head

1. Prepare the Mannequin Head: Cover the mannequin head with plastic wrap to protect it from the casting tape.
2. Apply Casting Tape: Follow the instructions on the casting tape package. Wrap the head but avoid covering it too much. Let it dry completely.
3. Remove the Mold: Cut up the back of the head mold to remove it from the mannequin. Only cut what is necessary to remove the mold.
4. Reassemble the Mold: Use super glue or epoxy to glue the cuts back together. Let it dry.
5. Attach Coat Hanger: Use epoxy or a hot glue gun to attach a coat hanger to the inside bottom back of the head for stability. Set aside for later use.

Step 2: Modifying the Trench Coat

1. Cut the Trench Coat: Cut the bottom of the trench coat to access the area between the outer layer and the liner. This is where the wearer will hide.
2. Stuff the Shoulders: Stuff the shoulders with paper or plastic bags to create a realistic shape. This will also provide a nesting area for the top of the wearer's head.
3. Create Arm Holes: Cut slits under the wearer's armpits through both the liner and the shell of the coat. Ensure the holes are large enough for an arm to fit through. Line up the sleeves and cut through them as well.
4. Create a Viewing Hole: Cut a hole in the liner to allow the wearer to see. Use a black see-through mask or fabric to camouflage the wearer's face.

Step 3: Preparing the Pants, Suspenders, and Bow Tie

1. First Pair of Pants: Cut a small hole in the inside waistband of one pair of pants. Thread a coat hanger through to create a round shape. Cut holes in the back of the knees large enough for the wearer to put their legs through.
2. Second Pair of Pants: The wearer will wear these pants without any alterations.
3. Bow Tie: Thread a coat hanger through the bow tie to create a round shape. Pin it in place on the trench coat.
4. Suspenders: Pin the suspenders near the shoulders and attach them to the pants. Pin the trench coat towards the front of the pants to give the costume depth.

Step 4: Adding Gloves and Accessories

1. Long Gloves: Use long gloves to cover the wearer's hands and arms. This helps maintain the illusion and keeps the wearer warm if it's cold.
2. Additional Layer: Consider adding another layer of black winter gloves for extra warmth and to enhance the illusion.

Step 5: Attaching the Head

1. Secure the Head: Cut a small hole in the liner for the coat hanger to slide into. Use safety pins to attach the head to the collar of the trench coat.
2. Stabilize the Head: Curve the end of the coat hanger around some of the paper stuffing to ensure it won't stab the wearer.

Step 6: Assembling the Costume

1. Put on the Pants: The wearer should put on the second pair of pants and sit down to put their feet through the back of the knees of the first pair of pants.
2. Wear Gloves, Mask, and Shoes: The wearer should put on the gloves, mask, and shoes.
3. Enter the Trench Coat: The wearer should stand and duck into the coat behind the liner. Adjust the head and ensure the arms go through the armholes.
4. Adjust Pant Legs: Ensure there is enough slack in the first pair of pants to avoid pulling down on the suspenders.
5. Add Final Touches: Place the hat on top of the head. Sunglasses can be added if desired, but they may need to be glued on to stay in place.

Additional Tips and Resources

Crazecosplay.com

Rank No.1

Conclusion